6 points to identify the quality of LED strip light

Due to the low entry threshold for LED strip light production, many people have started this project. However, experienced people still have a way to identify that the LED strip light produced by regular manufacturers and the knock-off LED light strips (that is, the products produced by manual work in the rental house) can be seen from the appearance at a glance. from. Let’s talk about how to identify the quality of LED light strips by eyes:

1. Solder joints. The LED light strips produced by regular LED light strip manufacturers are produced by SMT patch process, solder paste and reflow soldering process. Therefore, the solder joints on the LED strip are relatively smooth and the amount of solder is not much, and the solder joints extend from the FPC pads to the LED electrodes in an arc shape. However, the amount of solder in the solder joints of the copycat LED strip light is not uniform, and there is more than one dot covering the solder feet.

2. FPC quality. FPC is divided into two types: copper-clad and rolled copper. The copper foil of the copper-clad plate is protruding. If you look closely, you can see it from the connection between the pad and the FPC. The rolled copper is closely integrated with the FPC, and can be bent arbitrarily without the phenomenon of pad falling off. If the copper-clad plate is bent too much, the pads will fall off, and if the temperature is too high during maintenance, the pads will also fall off.

3. The cleanliness of the LED strip surface. If the LED strip light produced by the SMT process is used, the cleanliness of the surface is very good, and no impurities and stains can be seen. However, if the fake LED strip light produced by the hand soldering process is used, no matter how the surface is cleaned, there will remain stains and traces of cleaning, and at the same time, there will be flux and tin slag residues on the surface of the FPC.

4. Packaging. Regular LED strips will be packaged in anti-static reels, usually 5 meters or 10 meters, and then sealed with anti-static moisture-proof packaging bags. The copycat version of the LED light strip will use a recycled reel for cost savings, and then there is no anti-static moisture-proof packaging bag. If you look closely at the reel, you can see the traces and scratches left when the label is removed.

5. Labels. Regular LED strip packaging bags and reels will have printed labels instead of printed labels. The label of the copycat version is printed, and the specifications and parameters are not uniform.

6. Attachments. Regular LED light strips will be accompanied by instructions for use and strip light specifications in the packaging box, and will also be equipped with LED strip light connectors or card holders; while the knockoff LED strip light packaging box does not have these accessories, because after all, some manufacturers can still save money.

Share on facebook
Facebook
Share on twitter
Twitter
Share on linkedin
LinkedIn

Leave a Reply

Your email address will not be published. Required fields are marked *

Send Us A Message

Please writing your email, we will reply within 8 hours.